EVO II Server Racks are designed typically for mounting 1U servers in data center environment.

In a high density server storage, thermal management is critical as tremendous heat is generated by the servers and other equipments mounted in the rack.

To ensure the servers and equipments are protected from over heating, cold air is forced from the base of the rack upwards close to the front curved perforated door. This channel of cold air is suck into the servers via curved perforated door by the powerful fans to ensure optimum cooling occur. From the face of the server, cool air will run over and within the chassis to extract heat out from rear perforated door.

With tis configuration, maintenance is easily achieved and the mobility of the machine makes it easy to deploy or relocate according to your needs. Additional space can be used to mount more servers and other equipment.

The Half size Server Racks are designed typically for mounting 1U servers in a software testing environment.

In a high density server storage, thermal management is critical as tremendous heat is generated by the servers and other equipments mounted in the rack. To ensure the servers and equipments are protected from over heating, cold air is forced from the base of the rack upwards close to the front glass door. This channel of cold air is distributed to the face of the servers where the air intake occur. From the face of the server, the cool air will run over within the chassis and extract heat to the rear. The hot air is extracted from the rear channel and exhaust to the top of the rack.

To enhance cooling in the rack, perforated doors are used in the front and rear to enable direct cold air intake from the front and immediate hot air extraction from the rear.

With this configuration, maintenance is easily achieved and the mobility of the machine makes it easy to deploy or relocate according to your needs. Additional space can be used to mount more servers and other equipment.

The Multi-Tier Server Racks are designed typically for data center environment.

In a data center, floor space is very valuable. Rental of Server racks is usually based on a standard floor space of 600W x 900D or 1000D mm. When a small enterprise seek hosting at data center, they may have only a few servers. So to rent a full rack space may be too costly. To the data center management, whether a half rack or full rack space is rented, the floor space taken is similar. 

To compromise, we build Multi-Tier Server Racks to cater for this segment of users. We build up to 4-tier in a similar foot print. In another words, 4 customers can share a similar floor space of a 46U Server rack. Each customer will have 11U of Rack space, have individual front and rear access so that they will not disrupt the other customers servers or equipments.

The sides are accessible by authorized vendors of the data center.

With this configuration, maintenance is easily achieved and the flexibility to cater for different segment of customers is taken cared of.

KVM Console, 1U

Rack mounted KVM console saves up to 95% of rack space.

Using a 17" LCD monitor in the KVM console for servers set-up reduce the fatigue of the administrator.

Choice of trackball, touchpad and mini mouse is available in our standard product.

KVM Switch can be integrated with the console to further saves rack space.

Rack mounted power distribution socket is used for the power distribution within the Server rack.

Position the power distribution according to design and needs.

19" Rack mounted Power Distribution comes in a 5-way layout. 

Picture on the right show the BS-1363 standard 3-pin 230VAC socket.

Vertical mounted IEC standard power distribution socket is usually used for the power distribution within the Server rack.

IEC 320 standard power socket are acceptable internationally. 

Picture on the right show the IEC 320 Standard, 230VAC socket.